| Home | << 1 2 >> |
|
Carabano, M. J., Logar, B., Bormann, J., Minet, J., Vanrobays, M. L., Diaz, C., et al. (2016). Modeling heat stress under different environmental conditions. J. Dairy Sci., 99(5), 3798–3814.
Abstract: Renewed interest in heat stress effects on livestock productivity derives from climate change, which is expected to increase temperatures and the frequency of extreme weather events. This study aimed at evaluating the effect of temperature and humidity on milk production in highly selected dairy cattle populations across 3 European regions differing in climate and production systems to detect differences and similarities that can be used to optimize heat stress (HS) effect modeling. Milk, fat, and protein test day data from official milk recording for 1999 to 2010 in 4 Holstein populations located in the Walloon Region of Belgium (BEL), Luxembourg (LUX), Slovenia (SLO), and southern Spain (SPA) were merged with temperature and humidity data provided by the state meteorological agencies. After merging, the number of test day records/cows per trait ranged from 686,726/49,655 in SLO to 1,982,047/136,746 in BEL. Values for the daily average and maximum temperature-humidity index (THIavg and THImax) ranges for THIavg/THImax were largest in SLO (22-74/28-84) and shortest in SPA (39-76/46-83). Change point techniques were used to determine comfort thresholds, which differed across traits and climatic regions. Milk yield showed an inverted U-shaped pattern of response across the THI scale with a HS threshold around 73 THImax units. For fat and protein, thresholds were lower than for milk yield and were shifted around 6 THI units toward larger values in SPA compared with the other countries. Fat showed lower HS thresholds than protein traits in all countries. The traditional broken line model was compared with quadratic and cubic fits of the pattern of response in production to increasing heat loads. A cubic polynomial model allowing for individual variation in patterns of response and THIavg as heat load measure showed the best statistical features. Higher/lower producing animals showed less/more persistent production (quantity and quality) across the THI scale. The estimated correlations between comfort and THIavg values of 70 (which represents the upper end of the THIavg scale in BEL-LUX) were lower for BEL-LUX (0.70-0.80) than for SPA (0.83-0.85). Overall, animals producing in the more temperate climates and semi-extensive grazing systems of BEL and LUX showed HS at lower heat loads and more re-ranking across the THI scale than animals producing in the warmer climate and intensive indoor system of SPA.
|
|
Helming, K., Diehl, K., Geneletti, D., & Wiggering, H. (2013). Mainstreaming ecosystem services in European policy impact assessment. Environmental Impact Assessment Review, 40, 82–87.
Abstract: The concept of ecosystem services as developed for the Millennium Ecosystem Assessment (MA) is currently the most extensive, international, scientific concept dealing with the interaction between the world’s ecosystems and human well-being. The fundamental asset is seen in the relevancy of the concept at the science–policy interface. Albeit, the mainstreaming of ecosystem services into policy making requires a framework that allows the transition of the scientific concept into the rationale of policy making. We hypothesize that the procedure of policy impact assessment is a suitable venue for this transition. This brings up two questions: 1) where in the process of policy impact assessment can ecosystem services be mainstreamed? 2) How can the impact on ecosystem services properly be accounted for? In this paper we distinguish two groups of policy cases: explicit cases directly addressing ecosystem services, and implicit cases of policies that follow other purposes but may have unintended impacts on ecosystem services as a side effect. The second group covers a wide range of policies for which we set out a framework for mainstreaming of ecosystem services. The framework is exemplary designed for the instrument of ex-ante impact assessment at European policy making level. We reveal that the two concepts of the MA and of the European policy impact assessment are indeed compatible, which makes the integration of the ecosystem service concept possible. We conclude that the linkage of the scientifically validated concept of ecosystem services with the policy concept of impact assessment has the potential of improving the credibility of the latter.
|
|
Ventrella, D., Charfeddine, M., Moriondo, M., Rinaldi, M., & Bindi, M. (2012). Agronomic adaptation strategies under climate change for winter durum wheat and tomato in southern Italy: irrigation and nitrogen fertilization. Reg Environ Change, 12(3), 407–419.
Abstract: Agricultural crops are affected by climate change due to the relationship between crop development, growth, yield, CO2 atmospheric concentration and climate conditions. In particular, the further reduction in existing limited water resources combined with an increase in temperature may result in higher impacts on agricultural crops in the Mediterranean area than in other regions. In this study, the cropping system models CERES-Wheat and CROPGRO-Tomato of the Decision Support System for Agrotechnology Transfer (DSSAT) were used to analyse the response of winter durum wheat (Triticum aestivum L.) and tomato (Lycopersicon esculentum Mill.) crops to climate change, irrigation and nitrogen fertilizer managements in one of most productive areas of Italy (i.e. Capitanata, Puglia). For this analysis, three climatic datasets were used: (1) a single dataset (50 km x 50 km) provided by the JRC European centre for the period 1975-2005; two datasets from HadCM3 for the IPCC A2 GHG scenario for time slices with +2A degrees C (centred over 2030-2060) and +5A degrees C (centred over 2070-2099), respectively. All three datasets were used to generate synthetic climate series using a weather simulator (model LARS-WG). Adaptation strategies, such as irrigation and N fertilizer managements, have been investigated to either avoid or at least reduce the negative impacts induced by climate change impacts for both crops. Warmer temperatures were primarily shown to accelerate wheat and tomato phenology, thereby resulting in decreased total dry matter accumulation for both tomato and wheat under the +5A degrees C future climate scenario. Under the +2A degrees C scenario, dry matter accumulation and resulting yield were also reduced for tomato, whereas no negative yield effects were observed for winter durum wheat. In general, limiting the global mean temperature change of 2A degrees C, the application of adaptation strategies (irrigation and nitrogen fertilization) showed a positive effect in minimizing the negative impacts of climate change on productivity of tomato cultivated in southern Italy.
|
|
Sieber, S., Amjath-Babu, T. S., McIntosh, B. S., Tscherning, K., Müller, K., Helming, K., et al. (2013). Evaluating the characteristics of a non-standardised Model Requirements Analysis (MRA) for the development of policy impact assessment tools. Env. Model. Softw., 49, 53–63.
Abstract: The aim of this paper is to provide a critical analysis of the strengths and weaknesses of a non-standardised Model Requirements Analysis (MRA) used for the purpose of developing the Sustainability Impact Assessment Tool (SIAT). By ‘non-standardised’ we mean not strictly following a published MRA method. The underlying question we are interested in addressing is how non-standardised methods, often employed in research driven projects, compare to defined methods with more standardised structure, with regards their ability to capture model requirements effectively, and with regards their overall usability. Through describing and critically assessing the specific features of the non-standardised MRA employed, the ambition of this paper is to provide insights useful for impact assessment tool (IAT) development. Specifically, the paper will (i) characterise kinds of user requirements relevant to the functionality and design of IATs; (ii) highlight the strengths and weaknesses of non-standardised MRA for user requirements capture, analysis and reflection in the context of IAT; (iii) critically reflect on the process and outcomes of having used a non-standardised MRA in comparison with other more standardised approaches. To accomplish these aims, we first review methods available for IAT development before describing the SIAT development process, including the MRA employed. Major strengths and weaknesses of the MRA method are then discussed in terms of user identification and characterisation, organisational characterisation and embedding, and ability to capture design options for ensuring usability and usefulness. A detailed assessment on the structural differences of MRA with two advanced approaches (Integrated DSS design and goal directed design) and their role in performance of the MRA tool is used to critique the approach employed. The results show that MRA is able to bring thematic integration, establish system performance and technical thresholds as well as detailing quality and transparency guidelines. Nevertheless the discussion points out to a number of deficiencies in application – (i) a need to more effectively characterise potential users, and; (ii) a need to better foster communication among the distinguished roles in the development process. If addressed these deficiencies, SIAT non-standardised MRA could have brought out better outcomes in terms of tool usability and usefulness, and improved embedding of the tool into conditions of targeted end-users. (C) 2013 Elsevier Ltd. All rights reserved.
|
|
Podhora, A., Helming, K., Adenäuer, L., Heckelei, T., Kautto, P., Reidsma, P., et al. (2013). The policy-relevancy of impact assessment tools: Evaluating nine years of European research funding. Environmental Science & Policy, 31, 85–95.
Abstract: Since 2002, the European Commission has employed the instrument of ex-ante impact assessments (IA) to help focus its policy-making process on implementing sustainable development. Scientific tools should play an essential role of providing the evidence base to assess the impacts of alternative policy options. To identify the contribution of research funding for IA tool development, this paper analysed the variety of IA tools designed in projects funded by European Framework Programmes (FPs) 6 and 7. The paper is based on project information available on the European Cordis website, individual project websites and a verification of the results by the project coordinators. We analysed the projects from the interests of IA practitioners as tool users (European policy and impact areas addressed by the tools, jurisdictional application levels and tool categories). Out of the 7.781 projects funded in FP6 and FP7, 203 could be identified that designed tools for the IA process. Nearly half of them applied to environmental, agricultural and transport policy areas. Within these areas, the tools primarily addressed environmental impact areas, less economic and least social impact areas. The IA tools focused on European policies. Models represented the largest tool category, whereas approximately half of the tools could not be clearly categorized. Concerning our analysis criteria, the tool descriptions available on the internet were often unclear and thus may limit the application potential of the tools because of a mismatch of technical terms and categorisation criteria between tool providers and tool users. Future IA tools require a joint political and scientific typology and a narrowing of the gaps, e.g., with view to multi-jurisdictional application and a clear reference to the steps of the IA process. (C) 2013 Elsevier Ltd. All rights reserved.
|